Flexipads Denim Aggressive Orange Peel Pad Hook & Loop Fitting 150mm (6") DP600
With these Flexipads Denim Orange Peel Removal pads you can now remove or substantially reduce orange peel without sanding.
While removing orange peel and deep defects you are also polishing the paint rather than leaving sanding marks this reduces the subsequent steps required.
Remove Orange Peel and deep defects while simultaneously polishing paint.
Equivalent to approximately 2000 grit sanding medium without the dulling of paint and sanding haze.
Remove the Orange Peel effect without sanding and the haze created by sanding.
Breather perforations to avoid paint dust build-up on pad and help reduce the build up of heat.
Less dust and clean up prior to finishing polish.
Directions for use:
Attach to Hook & Loop backing plate on a Rotary polisher.
Apply a few drops of polish to paint or pad according to your skills and preference.
(A moist Polish may work better than a dry one, this will also help lubricate and reduce heat build up)
Work a 2' x 2' section or larger to keep heat down as needed but remember the larger the area the more time it will take to level orange peel and defects.
Begin working polish on low speed for a pass or so.
Step up speed to approx. 1200 rpm (adjust as needed).
With proper lighting observe the level of orange peel removal while you work.
Apply more polish if needed or a spray of water on pad to re-activate lubricants.
When satisfied with orange peel and defect removal slow speed, ending at 600 rpm as you finish down the polish.
Size: 150mm (6") Diameter
Pore Size: 90ppi
Material: Denim Surface with Hook & Loop backing
Made in: Great Britain
All Prices Exclude GST
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Flexipads World Class
Flexipads World Class™ has been manufacturing machine polisher foam and microfibre pads, backing plates and detailing must haves, in Great Britain, since 1974.